pressure-calibrator-hpc40-series-210x360.jpg
Images are representations only.

HPC41-30PSI

Series: HPC40 Series Pressure Calibrator Brand: AMETEK, Inc

CRYSTAL ENGINEERING Crystal Engineering HPC41 Handheld Pressure Calibrator - Single Pressure 0-30 psig Gauge Range Transducer 0.035% of Range Accura Cy Includes: Traceable Calibration Certificate, 4 x AA Batteries, 1/4" MNPT Adapter, Protective Boot, Test Leads with Clips, Velcro Strap, User Manual, Mini-USB Cable

Price
$2,294.00 CAD
Stock
25+ In Stock
Request Information

Specifications

Brand

Current (mA) Input

  • Accuracy: ± (0.015 % of Reading + 0.002 mA)
  • mA Range: 0 to 55 mA
  • Percent Range: 0-20, 4-20, 10-50
  • Maximum Allowable Current: 60 mA
  • Resolution: 0.001 mA or 0.01 %
  • Units: mA and %
  • Input Resistance: < 17.2 Ω
  • Voltage Burden @ 20 mA: < 0.35 V
  • Voltage Burden @ 50 mA: < 0.86 V
  • HART Resistor: 250 Ω

Current (mA) Output

  • Accuracy: ± (0.015 of Reading + 0.002 mA)
  • Range: 0 to 25 mA
  • Step Time: 1 to 999 seconds
  • Ramp Time: 5 to 999 seconds

Voltage (VDC) Input

  • Input Impedance: > 1 MOhm
  • Accuracy: ± (0.015 % of Reading + 2 mV)
  • Range: 0 to 30 Vdc
  • Resolution: 0.001 Vdc

Loop Power

  • Maximum Output Current: 25 mA
  • Voltage Output Accuracy: ± 10 %
  • Fixed Output: 24 Vdc

Switch Test

  • Switch Type: Dry Contact
  • Closed State Resistance: < 1KΩ
  • Sample Rate: 10 Hz

Temperature Measurement

  • Accuracy: ± (0.015 % of Reading) + 0.02 Ohm
  • Range: 0 to 400 ohms
  • Resolution: 0.01 on Aall Scales
  • Units: °C, K, °F, R, Ω
  • TCR: 0.003850 Ω/ Ω/°C (IEC 60751)
  • Wiring: 2-, 3-, and 4-Wire Support
  • Connection: Lemo Plug, 1S Series, 304 Insert Configuration

Data / Communication

  • Digital Interface: Mini - USB

Display

  • Screen: 320 x 240 Pixel Graphical Display
  • Display Rate: 3 Readings/Second (Standard) 10 Readings/Second (Switch Test and Peak Hi/Lo Modes)

Housing Material

  • Machined Aluminum
  • Keypad and Labels: UV Resistant Silicone

Certifications & Approvals

  • Australian Radio communications (Electromagnetic Compatibility) Standard 2008
  • CE

Environmental Protection

  • IP65

Operating Temperature

  • -20° to 50° C (-4° to 122° F)

Storage Temperature

  • -40° to 75° C (-40° to 167° F)

Pressure Range

  • 30 to 15,000 psi

Documentation

Brochure

View Product Series

Similar SKUs

IS31-16PSI
IS31-16PSI
30 Series Pressure Calibrator
Ametek
$1,183.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering IS Handheld Pressure Calibrator - Intrinsically Safe - Dual Pressure 16 psi Gauge Range Accuracy: 0.05% of Reading, 0-55 mA Input Range, 0.001 mA Resolution5 Digit Display, 1/8" FNPT Fittings, Intrinsically Safe, Includes Carrying Case with Strap and Calibration Certificate
IS31-1500PSI
IS31-1500PSI
30 Series Pressure Calibrator
Ametek
$1,315.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering IS Handheld Pressure Calibrator - Intrinsically Safe - Dual Pressure 1500 psi Gauge Range Accuracy: 0.05% of Reading, 0-55 mA Input Range, 0.001 mA Resolution5 Digit Display, 1/8" FNPT Fittings, Intrinsically Safe, Includes Carrying Case with Strap and Calibration Certificate
IS31-36PSI
IS31-36PSI
30 Series Pressure Calibrator
Ametek
$1,630.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering IS Handheld Pressure Calibrator - Intrinsically Safe - Dual Pressure 36 psi Gauge Range Accuracy: 0.05% of Reading, 0-55 mA Input Range, 0.001 mA Resolution5 Digit Display, 1/8" FNPT Fittings, Intrinsically Safe, Includes Carrying Case with Strap and Calibration Certificate
M1-30PSI
M1-30PSI
m1 Digital Pressure Gauge
Ametek
$1,904.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering M1 Digital Test Gauge 30 psi Gauge Range Accuracy: 0.2% of Reading (20-100% of Full Scale), 0.04% of Full Scale (0-20% of Full Scale), 5 Digit Display, 1/4" NPT Bottom Connection, Includes Calibration Report and Protective Boot with Hanging Strap
HPC41-30PSI
HPC41-30PSI
HPC50 Series Pressure Calibrator
Ametek
$239.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering HPC41 Handheld Pressure Calibrator - Single Pressure 0-30 psig Gauge Range Transducer 0.035% of Range Accura Cy Includes: Traceable Calibration Certificate, 4 x AA Batteries, 1/4" MNPT Adapter, Protective Boot, Test Leads with Clips, Velcro Strap, User Manual, Mini-USB Cable
APM-30PSI
APM-30PSI
APM CPF Series Advanced Pressure Module
Ametek
$1,496.00 CAD
12 In Stock
CRYSTAL ENGINEERING Crystal Engineering APM Advanced Pressure Module 30 psi Gauge Range Accuracy: 0.025% of Reading
XP2i-15PSI
XP2i-15PSI
XP2i Digital Pressure Gauge
Ametek
$174.00 CAD
25+ In Stock
CRYSTAL ENGINEERING Crystal Engineering XP2i Digital Test Gauge 15 psi Gauge Range Accuracy: 0.1% of Reading (20-100% of Full Scale), 0.02% of Full Scale (0-20% of Full Scale), 5 Digit Display, 1/4" NPT Bottom Connection, DB-9 Connector, Intrinsically Safe, Includes A2LA Accredited ISO 17025 Calibration Certificate
show more