Images are representations only.
DMH Electromagnetic Flowmeter
Brand: KOBOLD Instruments, IncThe KOBOLD DMH flowmeter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure.
When an electrically conductive medium passes through a directional magnetic field, a voltage is induced in accordance with Faraday's Law of Induction. The size of this measurement voltage is proportional to the mean rate of flow and consequently also to the volume flow rate.
A flowmeter consists of a sensor that picks up the measuring signal generated from the induced voltage, and a transducer that converts this signal into a standardized output signal (4-20 mA or pulses).
The measurement transducer can be affixed to the sensor or mounted separately. Pressure, temperature, density and viscosity do not affect the volume measurement. Solid fractions and gas bubbles should be avoided.
Features- Great Choice of Linings
- Stainless Steel, Hastelloy®, Tantalum or Platinum Electrodes
- Wide Variety of Process Connections
- Can be Used in Rough Ambient Conditions
Specifications
Brand
Accuracy
- ± 0.15 % of Reading, ± 0.005 % x Qmax
- ± 0.3 % of Reading ± 0.01 % x Qmax
Ambient Temperature Range
- -20° to 60° C (-4° to 140° F)
Applications
- Acids & Alkalis
- Drinking Water
- Pastes
- Wastewater
Communication
- HART
Electromagnetic Rating
- EMV Directive 2004/108/EG
Enclosure, Body Material
- Enamelled Die Cast Aluminum
- Enamelled Steel
- Stainless Steel
Environmental Protection
- IP67
- IP68
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - PN 40
Flange Size - 1-1/4” (DN 32)
- 1-1/4” (DN 32) - PN 40
Flange Size - 1” (DN 25)
- 1” (DN 25) - PN 40
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - PN 40
Flange Size - 10” (DN 250)
- 10” (DN 250) - PN 10
- 10” (DN 250) - PN 40
Flange Size - 12” (DN 300)
- 12” (DN 300) - PN 10
- 12” (DN 300) - PN 16
- 12” (DN 300) - PN 40
Flange Size - 14” (DN 350)
- 14” (DN 350) - PN 10
- 14” (DN 350) - PN 16
Flange Size - 16” (DN 400)
- 16” (DN 400) - PN 10
- 16” (DN 400) - PN 16
Flange Size - 18” (DN 450)
- 18” (DN 450) - PN 10
- 18” (DN 450) - PN 16
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - PN 16
- 2-1/2” (DN 65) - PN 40
Flange Size - 2” (DN 50)
- 2” (DN 50) - PN 40
Flange Size - 20” (DN 500)
- 20” (DN 500) - PN 10
- 20” (DN 500) - PN 16
Flange Size - 24” (DN 600)
- 24” (DN 600) - PN 10
- 24” (DN 600) - PN 16
Flange Size - 28” (DN 700)
- 28” (DN 700) - PN 6
Flange Size - 3” (DN 80)
- 3” (DN 80) - PN 16
- 3” (DN 80) - PN 40
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - PN 40
Flange Size - 3/8” (DN 10)
- 3/8” (DN 10) - PN 16
Flange Size - 32” (DN 800)
- 32” (DN 800) - PN 6
Flange Size - 36” (DN 900)
- 36” (DN 900) - PN 6
Flange Size - 4” (DN 100)
- 4” (DN 100) - PN 16
Flange Size - 40” (DN 1000)
- 40” (DN 1000) - PN 6
Flange Size - 48” (DN 1200)
- 48” (DN 1200) - PN 6
Flange Size - 5” (DN 125)
- 5” (DN 125) - PN 16
- 5” (DN 125) - PN 40
Flange Size - 6” (DN 150)
- 6” (DN 150) - PN 16
- 6” (DN 150) - PN 40
Flange Size - 8” (DN 200)
- 8” (DN 200) - PN 10
- 8” (DN 200) - PN 16
- 8” (DN 200) - PN 40
Flow Rate
- 0.05 to 40,376 m³/hour
Function
- Empty Pipe Recognition
- FLushing Flow Monitoring
Nominal Pressure
- psi: 87.02 to 580.2 (kPa: 600 to 4,000, bar: 6 to 40)
Output
- 1 x 0(4)-20 mA, Active, Galvanically Isolated - Analog Output
- 24 V, 60 mA Passive, Galvanically Isolated - Pulse Output
Process Connection Material
- 304 Stainless Steel
- Steel
Process Temperature
- -20° to 150° C (-4° to 302° F)
Sensor / Probe Material
- Hard & Soft Rubber - Linings
- Hastelloy C-4
- PFA - Linings
- Platinum
- PTFE - Linings
- Stainless Steel - Electrodes
- Tantalum
Supply Voltage
- 10 VA
- 115 Vac
- 230 Vac
- 24 Vdc 10 W
- 50/60 Hz
