Kobold Screw Flowmeter, OMH
Images are representations only.

OMH Screw Spindle-Meter

Brand: KOBOLD Instruments, Inc
Request Information
Favorite

The KOBOLD screw-type volumetric flowmeter based on the principle of positive displacement was developed in response to the need to measure and control viscous media.

It was specially designed to measure viscous media with non-abrasive properties. Variations in viscosity in the range 1 to 5000 mm2/s have no effect on measurement results within the measuring accuracy.

The KOBOLD screw-type volumetric flowmeter satisfies the stringent demands for greater accuracy, reliability and economic efficiency. Two spindles with cycloidal profiles form the basis of the screw-type volumetric flowmeter.

Spindles manufactured with extreme precision are supported at each end with a ball bearing.

The axially forced measuring medium causes the spindles to rotate uniformly.

The rotary motion is picked off with sensors and converted to a frequency signal. An exact measurement of the delivered flow volume is obtained with the volumetrically defined measuring chambers.

Combined with downstream evaluation electronics, the KOBOLD screw-type volumetric flowmeter becomes a flexible measurement and control system for viscous media.

View Details

Specifications

Brand

Applications

  • Chemical Industry: Acids & Iyes, Ethyl Alcohol, Freon
  • Food Industry: Margarine, Fats, Liqueur, Oils
  • Furnaces: EL Heating Oil, S Heating Oil, Diesel Oil
  • Hydraulics: Hydraulic Oil, Lubricating Oil, Gear Oil
  • Mixing & Dosing Systems: Polyhydroxy Alcohol, Isocyanate Additives for Gasoline, Cement
  • Printing Inks
  • Tests Stands

BSP Connection

  • G 1”
  • G 1/2”
  • G 1-1/2”
  • G 2”
  • G 3/4”
  • G 4”

Cable Length

  • 9.84 feet (3 metres) - PTFE Cable

Electrical Connectors

  • 9.84 feet (3 metres) PTFE Cable

Enclosure / Body Material

  • Ductile Iron

Environmental Protection

  • IP65
  • IP67
  • IP68

Flange Material

  • Steel 1.7139

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - PN 400

Flange Size - 1” (DN 25)

  • 1” (DN 25) - PN 400

Flange Size - 1/2” (DN 15)

  • 1/2” (DN 15) - PN 400

Flange Size - 2” (DN 50)

  • 2” (DN 50) - PN 400

Flange Size - 4” (DN 100)

  • 4” (DN 100) - PN 250

Materials of Construction

  • Ceramic - Dry Sleeve

O-Ring Material

  • FPM

Operating Temperature

  • -20° to 200° C (-4° to 392° F)

Supply Voltage

  • 10-30 Vdc
  • 5-25 Vdc

Switch Type

  • NAMUR
  • PNP

Thread

  • M18 x 1 with O-Ring in the Case

Documentation

Data Sheets

show more