Images are representations only.
CALDON LEFM 2010MSE System
Brand: CameronThe Caldon LEFM 2010MSE System provides accurate and reliable measurement of moisture separator drain flow, which is critical in calculation of the efficiency of the moisture separator system.
The LEFM 2010MSE uses acoustic transducers installed on the outside of the pipe to measure average velocity through the pipe.
The measured velocity is integrated over the cross-sectional area of the pipe to determine volumetric flow rate.
System accuracy is ±1% to ±3% of flow, and is a function of the size of the drain pipe and the exact installation conditions.
Use of externally mounted transducers allows the system to be installed easily, without requiring alteration of the pipe.
The system is very low maintenance and provides continuous on-line verification that all meter elements are operating correctly.
Whether used for one-time moisture separator efficiency during turbine performance testing, or for long-term trending, the LEFM 2010MSE provides cost-effective flow measurement for a difficult application.
Features- Cost-effectively measures moisture separator flow rate
- External system – installed completely outside the piping
- High temperature operation to 550ºF (288ºC)
- Used in conjunction with tracer monitoring to determine moisture separator efficiency
Specifications
Brand
System Accuracy
- Moisture Separator Drain Flow: ± 1 % to ± 3 %
Electronics Unit
- Storage Temperature: -65° to 165° F (-53° to 73.9° C)
- Ambient Temperature: 0° to 120° F (-17.8° to 48.9° C)
- Storage/Operating Humidity: 0 % to 95 % (Non-Condensing)
- Outputs: 0-5 V or 0-12 V Pulse Output; Up to four (4) 4-20 mA Analog Outputs; Two (2) Modbus RS-485 Outputs
Pipe Mounted Hardware
- Process Temperature: 32° to 550° F (0° to 288° C)
- Process Pressure: No Limit (External System)
Supply Power
- Normal Voltage: 120 VAC (60 Hz) or 240 VAC (50/60 Hz)
- Power Surges: Up to 1200 V for < 50 µs
- Outputs: (4) 4-20 mA; RS 422/485
