Images are representations only.
ATA-K Turbidity Measurement System
Brand: KOBOLD Instruments, Inc
The high precision KOBOLD single-beam turbidity sensor ATA-K measures the degradation of light (in the near infrared range, NIR) passing through the process medium.
The sensor has been manufactured from stainless steel and designed for fitting in the process piping. The process medium is penetrated by a suitably focused, constant beam of light.
The intensity of the incoming light is measured by a silicon photodiode and routed to the transmitter as a photoelectric current.
The changes of intensity in this light, caused by absorption and /or scattering by substances (dissolved and undissolved) in the medium, is measured and output by the transmitter. Concentration can thus be measured in the ppm range as well as in the % range.
Specifications
Brand
Accuracy
- < 1 % F.S.D
- ± 2 % of Set Upper Range Value
Adjustment
- 1 % Steps of the Measuring Range: Alarm Setting
Ambient Temperature Range
- 0° to 40° C (32° to 104° F)
- 0° to 50° C (32° to 122° F) - Model ATT-K
Applications
- Filter Aids
- Gas Bubbles
- Oil in Water
- Phase Separation
- Product Identification
- Quality Control
- Separator Control
- Yeast Cell Count/Dosing
Approvals & Certifications
- CE
Approvals & Certifications
- GS (Geprufte Sicherheit)
Cable Length
- 328.1 feet (100 metres)
Consumption
- 30 VA - Power Consumption
Display
- 3-Digits
Electrical Connectors
- 2 Changeover Contact: Floating - FAIL-SAFE
Enclosure, Body Material
- 316Ti Stainless Steel
- TFMC (PTFE/Coal Compound)
Environmental Protection
- IP40 - Panel Housing
- IP65
- IP66 - Field Housing
Flange Size - 1” (DN 25)
- 1” (DN 25) - 150#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
Frequency
- 47 to 64 Hz - Power Supply
Load
- 500 ohms, Max.
Mounting
- Panel Mount
NPT Connection
- 1” NPT Female
Output
- 4-20 mA (Isolated)
Pipe Connection
- 1” Pipe (DN 25)
Power Requirement
- 115 Vac
- 230 Vac
- 24 Vac/dc
Pressure Range
- psi: 0.145 to 232.1 (kPa: 1 to 1,600, bar: 0.01 to 16) - Process Pressure
Process Temperature
- 0° to 100° C (32° to 212° F)
Response Time
- 1 second (T90)
Seat / Seal Material
- EPDM
- FPM
- PTFE
- Silicone
Wavelength
- 730 to 970 Nm
Window Material
- Borosilicate Glass
- Sapphire - Optional
