Images are representations only.
PAS Pressure Transmitter
Brand: KOBOLD Instruments, Inc
The Kobold Pressure Transmitter model PAS is a micro processor-based high performance transmitter, which has a flexible pressure calibration and a flexible output signal.
It has an automatic compensation of ambient temperature and process variables. A communication with the instrument and a configuration of various parameters is possible via the HART protocol. All data of sensor is to be input, modified and stored in an EEPROM.
Specifications
Accuracy
- ± 0.075 % of Calibrated Span
- ± 0.2 % of Calibrated Span at 20° C (68° F) - PAS-P
Ambient Temperature Range
- 20° to 35° C (68° to 95° F) - PAS-P
- -30° to 80° C (-22° to 176° F)
Applications
- Level & Gauge Pressure Measurement - Version with 50 mm Extended Diaphragm
- Paper & Pulp Industry - Version with 50 mm Extended Diaphragm
Approvals & Certifications
- ATEX Zulassung - II 2 G Exd IIC T6-T4
- EMI (Emission) - EN 50081-2: 1993, EMS (Immunity) - EN 50082-2: 1995
Diaphragm Material
- 316L Stainless Steel, 1.4401
- Hastelloy C
- Tantalum
Display
- 5-Digit LCD Display
Electrical Connectors
- 1/2” NPT Conduit with M4 Screw Terminals
- G 1/2” Conduit with M4 Screw Terminals
Enclosure / Body Material
- 316L Stainless Steel
- Aluminum, Flameproof (Ex d) & Waterproof (IP67)
Enclosure Finish
- Epoxy-Polyester Paint
- Polyurethane Paint
Environmental Protection
- Flameproof
- IP67
- Water-Proof
Fill Material
- Inert Oil Fill
- Silicone Oil
Flange Size - 1-1/2” (DN 40)
- 150# - 1-1/2” (DN 40)
- PN 16 - PAS-P
Flange Size - 1-1/4” (DN 32)
- 150# - 1-1/4” (DN 32)
- PN 16 - PAS-P
Flange Size - 1” (DN 25)
- 150# - 1” (DN 25”)
- PN 16 - PAS-P
Flange Size - 2-1/2” (DN 65)
- 150# - 2-1/2” (DN 65)
- PN 16 - PAS-P
Flange Size - 2” (DN 50)
- 150# - 2” (DN 50)
- PN 16 - PAS-P
Flange Size - 3” (DN 80)
- 150# - 3” (DN 80)
- PN 16 - PAS-P
Flange Size - 4” (DN 100)
- 150# - 4” (DN 100)
- PN 16 - PAS-P
Flange Size - 5” (DN 125)
- 150# - 5” (DN 125)
- PN 16 - PAS-P
Flange Size - 6” (DN 150)
- 150# - 6” (DN 150)
- PN 16 - PAS-P
Flange Type
- Class 150 RF
Humidity
- 5 % to 98 % Relative Humidity
Load Impedance
- 250 ohms at 17.5 Vdc
- 550 ohms at 24 Vdc
Materials of Construction
- 304 Stainless Steel, 1.4301, Paint Carbon Steel - Mounting Bracket & Nameplate
Measuring Span
- bar: -1 to 1.5 up to 0 to 600 (psi: -14.5 to 21.7 up to 0 to 8702, kPa: -100 to 150 up to 0 to 60,000)
Mounting
- 2” Pipe Mounting Bracket
- U-Bolt
Mounting Position
- Upright
NPT Connection
- 1/2” NPT Female
- 1/4” NPT Female
O-Ring Material
- Buna-N
- FPM - PAS-P
Output
- 2-Wire 4-20 mA
Power Supply
- 12-45 Vdc - Operation
- 17.5-45 Vdc - HART
Pressure Range
- bar: -1 to 750
- kPa: -100 to 75,000
- psi: -14.7 to 10,000
Pressure Type
- Absolute
- Gauge
Process Temperature
- 20° to 35° C (68° to 95° F) - PAS-P
- -40° to 120° C (-40° to 248° F)
Sensor / Probe Type
- Piezoresistive Ceramic Cell
Span - Minimum
- psi: -14.5 to 22 (kPa: -100 to 150, bar: -1 to 1.5)
Stability
- ± 0.125 % of URL / 3-Years - Long-term Stability
- Typically ± 0.125 % of URL/1-Year (Long-term Stability) - PAS-P
Storage Temperature
- -40° to 85° C (-40° to 185° F)
Temperature Effect
- ± (0.019 % of URL + 0.125 % of Span)/28° C
Turn-On Time
- 3 seconds
Wetted Materials
- 316L Stainless Steel - Isolating Diaphragms
- Hastelloy C - Isolating Diaphragms
- Tantalum - Isolating Diaphragms
