Cameron Flanged Check Valve, WHEATLEY 500

Images are representations only.

WHEATLEY 500 Flanged Check Valve

WHEATLEY Series 500 check valves are fire-tested carbon steel flanged end check valves with a full-open, through-conduit design for low pressure drop and less turbulence.

Their backfaced flanges provide smoother bolting surfaces and even bolt loading.

Features

316 stainless steel trim compatible with a broad range of media and operating conditions
Full-open, through-conduit design for low pressure drop, less turbulence, and easy passing of pigs and spheres
90-durometer, peroxide-cured seals compatible with a broad range of media and operating conditions
Bubble-tight shutoff
Vertical flowup or horizontal installation
Reduced installation guesswork
Conformance to NACE MR0175/ISO 15156
Cast on flanges for greater valve body integrity and fewer leak points
API Spec 6D monogram and conformance to ASME B16.34 (for models 510 and 511)
Fire-tested to API Spec 6FD requirements (excluding 1-in [25-mm] valve)
Canadian Registration Number (CRN) upon request
Bolted top-entry complete with 1/2-in [25-mm] NPT cover tap for gauges and accessories (excluding 1-in [25-mm] valve)
Inline repair
Through-pin clapper shaft that makes clapper removal easier and extends valve life by transferring wear and tear to an inexpensive replaceable part

Specifications

Brand

Cameron

Approvals & Certifications

API 6D
API 6FD

Approvals & Certifications

ISO 15156

Cover Material

Cast Steel (ASTM A487-4C)
WCC Steel (ASTM A216 Grade WCC)

Enclosure, Body Material

316 Stainless Steel
Carbon Steel

Flange Size - 1” (DN 25)

1” (DN 25) - 150# ASME
1” (DN 25) - 1500# ASME
1” (DN 25) - 300# ASME
1” (DN 25) - 600# ASME
1” (DN 25) - 900# ASME
1” (DN 25) - PN 100
1” (DN 25) - PN 150
1” (DN 25) - PN 20
1” (DN 25) - PN 250
1” (DN 25) - PN 50

Flange Size - 10” (DN 250)

10” (DN 250) - 150# ASME
10” (DN 250) - 1500# ASME
10” (DN 250) - 300# ASME
10” (DN 250) - 600# ASME
10” (DN 250) - 900# ASME
10” (DN 250) - PN 100
10” (DN 250) - PN 150
10” (DN 250) - PN 20
10” (DN 250) - PN 50

Flange Size - 12” (DN 300)

12” (DN 300) - 150# ASME
12” (DN 300) - 1500# ASME
12” (DN 300) - 300# ASME
12” (DN 300) - 600# ASME
12” (DN 300) - 900# ASME
12” (DN 300) - PN 100
12” (DN 300) - PN 150
12” (DN 300) - PN 20
12” (DN 300) - PN 50

Flange Size - 2” (DN 50)

2” (DN 50) - 150# ASME
2” (DN 50) - 1500# ASME
2” (DN 50) - 300# ASME
2” (DN 50) - 600# ASME
2” (DN 50) - 900# ASME
2” (DN 50) - PN 100
2” (DN 50) - PN 150
2” (DN 50) - PN 20
2” (DN 50) - PN 250
2” (DN 50) - PN 50

Flange Size - 3” (DN 80)

3” (DN 80) - 150# ASME
3” (DN 80) - 1500# ASME
3” (DN 80) - 300# ASME
3” (DN 80) - 600# ASME
3” (DN 80) - 900# ASME
3” (DN 80) - PN 100
3” (DN 80) - PN 150
3” (DN 80) - PN 20
3” (DN 80) - PN 250
3” (DN 80) - PN 50

Flange Size - 4” (DN 100)

4” (DN 100) - 150# ASME
4” (DN 100) - 1500# ASME
4” (DN 100) - 300# ASME
4” (DN 100) - 600# ASME
4” (DN 100) - 900# ASME
4” (DN 100) - PN 100
4” (DN 100) - PN 150
4” (DN 100) - PN 20
4” (DN 100) - PN 250
4” (DN 100) - PN 50

Flange Size - 6” (DN 150)

6” (DN 150) - 150# ASME
6” (DN 150) - 1500# ASME
6” (DN 150) - 300# ASME
6” (DN 150) - 600# ASME
6” (DN 150) - 900# ASME
6” (DN 150) - PN 100
6” (DN 150) - PN 150
6” (DN 150) - PN 20
6” (DN 150) - PN 250
6” (DN 150) - PN 50

Flange Size - 8” (DN 200)

8” (DN 200) - 150# ASME
8” (DN 200) - 1500# ASME
8” (DN 200) - 300# ASME
8” (DN 200) - 600# ASME
8” (DN 200) - 900# ASME
8” (DN 200) - PN 100
8” (DN 200) - PN 150
8” (DN 200) - PN 20
8” (DN 200) - PN 50

Flange Type

Raised Face (RF)
RTJ - Ring Typical Joint

Mounting

Horizontal or Vertical

NACE & NIST

NACE MR-0175

NPT Connection

1/2” NPT - Cover Tap for Gauges & Accessories

Nut & Bolt Material

Alloy Steel (ASTM A193 B7M) - Stud Material
Carbon Steel (ASTM A194 Grade 2H) - Nut Material
Chromium Molybdenum Steel (ASTM A193 Grade B7) - Stud Material
Forged Steel - Eyebolt Material

O-Ring Material

FKM - Clapper/Seat O-Ring & Cover O-Ring Material
Peroxide-Cured Buna - Clapper/Seat O-Ring, Cover O-Ring & Removable Seat O-Ring Material

Operating Pressure

psi: 275 to 5,000 (kPa: 1,896 to 34,470, bar: 18.96 to 344.7)

Plug Material

Carbon Steel (ASTM A105) - Pin Plug, Vent Plug & Drain Plug Material

Temperature Range

-29° to 121° C (-20° to 250° F) - Standard Trim API 6D
-29° to 204° C (-20° to 400° F) - Standard Trim DPV

Valve Size

1” to 12” (25.4 to 304.8 mm)

Documentation

WHEATLEY 500 Flanged Check Valve

Product Details

Inventory

No Models Match Your Filter Criteria

Configure

WHEATLEY 500

Specifications

Specifications

Brand

Approvals & Certifications

Approvals & Certifications

Cover Material

Enclosure, Body Material

Flange Size - 1” (DN 25)

Flange Size - 10” (DN 250)

Flange Size - 12” (DN 300)

Flange Size - 2” (DN 50)

Flange Size - 3” (DN 80)

Flange Size - 4” (DN 100)

Flange Size - 6” (DN 150)

Flange Size - 8” (DN 200)

Flange Type

Mounting

NACE & NIST

NPT Connection

Nut & Bolt Material

O-Ring Material

Operating Pressure

Plug Material

Temperature Range

Valve Size

Documentation

Documentation

Data Sheets

Product Manuals

Brochure