Images are representations only.
NUFLO MC-II Flow Analyzer
Brand: CameronCameron’s NUFLO MC-II Flow Analyzer provides separate, continuous digital displays of flow rate and accumulated flow based on input from a NUFLO or BARTON liquid or gas turbine flow meter.
The low current consumption of its liquid crystal displays and CMOS micro-processor based circuitry enable years of dependable performance from a single lithium battery. Typical battery life is three to five years.
Totalizer readings can be made in any desired volumetric units, and flow rates can be measured in units per second, minute, hour or day. Rate and total are quickly and easily calibrated using the keypad on the front of the MC-II.
The instrument is suitable for outdoor installation and requires no additional protection from the weather. The unit may be mounted directly on the turbine meter or attached remotely.
Specifications
Brand
Size
- 7.3” wide x 8.3” high x 3.4” deep
Weight
- 6 lb including Shipping Container
Power Supply
- One 3.6 volt Lithium Battery
Current Consumption
- 200 microamps typical
Temperature Range
- -40°F to 140°F (-40°C to 60°C)
Totalizer & Flow Rate Display
- Six digits
Divisor or Calibration Factor Range
- 0.001 to 999,999
Standard Units
- bbl and bpd (other units available)
Accuracy
- ±1 count (totalizer)
Input Frequency
- 0 to 3500 Hz
Input Amplitude
- 30 to 3000 mV Perak-to-Peak
Approvals
- CSA-certified in US and Canada, intrinsically safe in hazardous locations Class I, Division 1, Groups A, B, C, D; Type 4 enclosure
- ATEX-certified, II 1G Ex ia IIC T4 IP66
- Compliant with EMC Directive
